The Minn Kota endura c2 trolling motor is one of the best trolling motors on the market right now. The Minn Kota brand has been around for 85 years, and their trolling motors are extremely durable and sought after by anglers from all over North America.
The endura c2 trolling motor by Minn Kota comes with several great features that distinguish itself from other brands. Let us take a closer look at some of those amazing features.
Note: most links in this article are Amazon.com Affiliate links, see Affiliate Disclosure, thank you.
Who Makes the Endura C2?
The Endura C2 trolling motor is manufactured by Minn Kota Motors, whose parent company is Johnson Outdoors. Minn Kota has an indestructible reputation for building strong, dependable, and long-lasting motors.
The first gear-driven electric trolling motor was invented by O.G. Schmidt in 1934. After the motor’s popularity surged among anglers, Schmidt founded Minn Kota Motors, and the company has been producing electric trolling motors for over 85 years.
Who is the Endura C2 Designed For?
The Minn Kota Endura C2 trolling motor is designed for anglers who are serious about having a good quality electric trolling motor at a fair price. The Minn Kota Endura C2 electric trolling motor comes with a variety of options of shaft length and thrust to accommodate every size of boat.
The fact that it only needs one 12-volt deep cycle marine battery makes it super simple to install, mount, and properly wire. The simplicity of this electric trolling motor also makes it the perfect motor for anglers that might not feel comfortable wiring a more complex 36-volt or 48-volt system.
What Thrusts Are Available for the Endura C2?
The Minn Kota Endura C2 trolling motor comes with five different thrust options. Choose between 30lb, 40lb, 45lb, 50ln, and 55lb thrusts. The higher the thrust, the better the trolling motor will work on heavier boats, and the faster the boat will travel.
Remember, the higher the thrust, the higher the power draw, and the quicker your trolling motor deep cycle batteries will deplete. It is a good idea to have an onboard charging system or to keep extra batteries on board to prevent you from cutting your fishing day short by needing to run to shore for a recharge.
Thrust is measured in pounds and means that one pound of thrust is equal to the amount of thrust needed to keep one pound of mass stationery in the air against the force of the Earth’s gravity. But what does this mean for your boat?
We recommend as a general rule, at a minimum, you should have at least two pounds of thrust for every 100 pounds of boat weight.
What Shaft Length Are Available for the Endura C2?
The Minn Kota Endura C2 trolling motor is available in three different shaft sizes. Choose from a 30, 36, or 42-inch shaft length. The Minn Kota trolling motor shaft is an indestructible composite shaft that comes with a lifetime guarantee.
You must pick the correct trolling motor shaft length for your boat. A shaft length that is too short can be ineffective, and worse, cause fish scaring noises on the surface of the water.
First, determine where you will be mounting your trolling motor. Will you be mounting it on the bow, or the transom (stern) near the boat’s engine? Next, you will need to measure the distance from the bow or the transom to the waterline.
A general rule is that you want the trolling motor’s propeller submerged at least 12 inches. Also, add five inches if you fish in rough waters and an additional 12 inches for steering the trolling motor from a mounted chair or standing position.
Then, add your bow or transom to waterline measurement, and you will get what trolling motor shaft length you will need for your boat. Here is a simple table to explain better.
Transom (stern) Shaft Length Selection Guide
| The measurement from Transom to Waterline | Required Shaft Length |
| 0 – 10 inches | 30 inches |
| 10 – 16 inches | 36 inches |
| 16 – 20 inches | 42 inches |
| 22 inches or more | Contact Minn Kota for Custom Solution |
Bow Shaft Length Selection Guide
| The measurement from Bow to Waterline | Required Shaft Length |
| 0 – 16 inches | 36 inches |
| 16 – 22 inches | 42 – 45 inches |
| 22 – 28 inches | 48 – 52 inches |
| 28 – 34 inches | 54 – 62 inches |
| 34 – 44 inches | 72 inches |
The Endura line of motors is a great fit for a drift boat. If you plan to mount the motor to the front of the boat you can remove the control head and reconnect it backward. A trolling motor handle extension will make it so you can control your motor from the center of the boat.
What Voltage is the Endura C2?
The Minn Kota Endura C2 trolling motor requires one 12-volt deep cycle marine battery for operation. Simply connect the black negative (-) jumper wire to the black negative (-) lead on the trolling motor. Next, connect the red (+) positive jumper wire to the red positive (+) lead on the trolling motor.
If you need to hook up an onboard charging unit, take the smaller wires from the charging unit and attach them correctly to your deep cycle marine battery.
What Are Some of the Key Features of the Endura C2?
- Telescoping Tiller: Six-inch telescoping tiller designed for easy control of your boat and comes with on/off power settings and eight speeds.
- 5 Forward/3 Reverse Speed Settings: Move your boat how you want and with precision control with five forward speeds settings and three reverse speed settings.
- Power Prop: This power prop is specifically designed to put out extra power to push through weed beds with ease.
- Lever Lock Bracket: This level lock bracket has 10 different positions and a quick-release lever. It is made from composite material. It also has 180-degree rotation capabilities.
- Indestructible Shaft: The indestructible composite shaft comes with a lifetime Minn Kota guarantee.
Products
Minn Kota Endura C2 30 Transom Mount Trolling Motor 30-inch Shaft
All the great dependability and trustworthiness that come with the Minn Kota brand can be found in the Minn Kota Endura C2 30lb thrust trolling motor. It comes with a 6-inch telescoping tiller for superior boat movement and control.
The power prop is specially designed to deliver the power necessary to push through heavy weed beds and other vegetation. The 30lb thrust Minn Kota Endura C2 trolling motor is only available with a 30-inch shaft, perfect for smaller boats.
Check out the price on Amazon.com
Minn Kota Endura C2 45 Transom Mount Trolling Motor 36-inch Shaft
The Minn Kota Endura C2 45lb thrust electric trolling motor is available in a 36-inch shaft length. This 12-volt transom-mounted motor utilizes cool, quiet power to maximize battery life and not to scare away fish. With five forward speeds and three reverse speeds, you will be able to slip into your favorite honey holes easily.
Check out the price on Amazon.com
Minn Kota Endura C2 55 Transom Mount Trolling Motor 42-inch Shaft
The Minn Kota Endura C2 55lb thrust electric trolling motor is available in two shaft lengths, 36-inches and 42 inches. The lever lock bracket has 10 different positions and 180-degree rotation capabilities.
The bracket is made from the same indestructible composite material that the shaft is manufactured with. The Minn Kota composite shaft comes with a lifetime warranty. The Endura C2 motor comes with a two-year warranty.
Check out the price on Amazon.com
There are a few more thrust and length combinations available, but we think this covers the most popular options.
Alternatives
Newport Vessels NV-Series Saltwater Transom Mounted Trolling Motor 30-inch Shaft
The Newport NV-Series electric trolling motor comes in two different shaft sizes and five different thrusts. Each trolling motor comes with eight speeds: five forward speeds and three reverse speeds.
With a six-inch telescoping handle, you will be in complete control of your boat at all times. The Newport Vessels NV-Series electric trolling motor possesses saltwater compatible hardware and can be used in either saltwater or freshwater.
Each Newport NV-Series trolling motor comes with a two-year warranty.
- The 30-inch shaft trolling motor comes in wither 36lb, 46lb, or 55lb thrust and requires one 12-volt deep cycle marine battery.
- The 36-inch shaft trolling motor comes in 62lb or 86lb thrust. The 62lb thrust electric motor needs one 12-volt deep cycle marine battery where the 86lb thrust motor requires two 12-volt batteries wired in series for 24 volts.
If you are looking for a budget-friendly bow mount motor with autopilot a Cayman trolling motor might be your best option. Technically this motor is named AQUOS Haswing Cayman B.
This motor is a 12 volt 55-pound thrust motor that is durable with no frills. You can add this motor to any small boat and take your fishing to the next level.
Now, this motor is not going to work well on a big river but it is perfect for large ponds and lakes. Check out our article with all the details of this motor. This motor is available with more features for a small upgrade in cost.
Check out this article for a budget-friendly bow mount trolling motor.
Ready to Purchase Your Brand New Minn Kota Electric Trolling Motor?
Anglers looking for a high-quality, dependable, and efficient trolling motor do not need to look any further than the Minn Kota Endura C2 electric trolling motor.
Designed to provide incredible thrust with a low power draw, this electric trolling motor will have you out fishing longer and your batteries lasting longer. Rest easy and enjoy all your fishing trips without worry, knowing that each Minn Kota Endura C2 electric trolling motor is covered by warranty.
The motor itself is covered with a two-year manufacturer’s warranty while the composite shaft is guaranteed for life. Happy fishing!
FAQ
Does the Minn Kota Endura C2 electric trolling motor come with all the necessary wires for installation?
Yes, all Minn Kota electric trolling motors come with the necessary wires for installation. These trolling motors come with everything you need except for the 12-volt deep cycle marine batteries.
Is there a battery indicator for the Minn Kota Endura C2 electric trolling motor?
No, there is no battery indicator on the trolling motor. A good investment to make is the purchase of the Minn Kota Power Center Battery Box. The Minn Kota Power Center Battery Box will keep your deep cycle marine battery dry, clean, has a light-up battery indicator and allows you to plug-in 12-volt accessories. It also comes with two manual reset circuit breakers: 10-amp for accessory plus and 60-amp for the trolling motor.
Do I need to install a circuit breaker when I wire my 12-volt battery to the Endura C2 electric trolling motor?
Yes, we recommend that you install a circuit breaker or inline fuse of 30-amps on the positive wire. This will prevent damaging your trolling motor in the event of a power surge, or if your wires get wet or crossed.
How long are the leads to connect to the battery?
The leads are around 152 cm. You can purchase wire extensions to accommodate a further reach but be sure you discuss what AWG you will need for the distance you need with a professional before installation.
What is the overall weight of the Minn Kota Endura C2 electric trolling motor?
The Minn Kota electric trolling motor weighs in at approximately 7.71 Kg.
What is the diameter of the propeller?
The propeller measures 23.5 cm tip to tip.
Is the Minn Kota Endura C2 electric trolling motor suitable for both saltwater and freshwater?
The Minn Kota Endura C2 electric trolling motor is designed specifically for freshwater. However, if you use this trolling motor in saltwater, be sure to thoroughly spray-wash the motor and deep clean each part to prevent corrosion. If you plan to mainly fish in saltwater, please look at a saltwater Minn Kota trolling motor instead.
Why do Minn Kota trolling motors have a two year warranty? Isn’t that short?
Two years is above standard for most trolling motor manufacturers. Additionally, the Minn Kota motors are very durable and the Endura series is known to last far past the warranty. However, Minn Kota customer service is great and always willing to assist customers with issues, even if your product is out of warranty,
How do I determine which size trolling motor is right for my boat?
Boat weight is the first factor when sizing your motor for every 100 pounds of loaded weight you need 2 pounds of thrust. For example: if your full boat weighs 2500 pounds you need a 50-pound thrust motor. 2500 / 100 x 2 = 50. As for length, go with the longest motor that will match your thrust. If you buy too small or under thrust you will have issues.
